Clockmaking - How To Make A Clock In The Home Machine Shop - Part 1 - Making The Clock Frames
Channel:Clickspring · Length:9:29 · Published:2015-02-17 · Views:697963
Summary
The first episode of Clickspring's series building a John Wilding skeleton clock from raw stock in a home machine shop. It covers making the frames along with the tools needed for the job.
Why HN recommends it
Recommended as an absorbing masterpiece of craftsmanship, often raised in threads about watches and clockmaking.
It's also a masterpiece, just in a different medium — HN, 2022
Mechanical & precision engineering · Woodworking, metalworking & workshop skills
Subtitles (excerpt)
G'day Chris here, welcome to Clickspring. In this first video of what will be a multi-part series, I begin the construction of a John Wilding Large Wheel skeleton clock, by making the frames. I'm going to model most of the parts in CAD as I go along; it should make it easier to follow what I'm doing in each video. But in this case, it also has the added benefit that I can use a printout of the model as a template to cut out the basic shape of the frame. The brass is 3/16 inch engravers brass. And the glue I'm using is an oil based spray. it holds up quite well to all the handling this part gets while its being made. I want the frames to be an exact match, so I'm cutting out both of them at the same time, using the one template And for the time being I'm using these machinist clamps to hold them together. But ideally I want to do away with these clamps, and hold the plates together using cap screws at each of the pillar hole locations. You'll see what I mean later. Before I can deal with that though, I need a way of registering the plates together so that whenever they are pulled apart they will go back together in exactly the same way. I'm going to do that with some tapered brass clock pins.
On Hacker News
This is lovely! While there's a lot of watch content on YouTube, I'm amazed that no one has called out Clickspring's skeleton clock build. It's also a masterpiece, just in a different medium: Full build playlist: [LINK] Direct link to the first episode: [VIDEO] — MengerSponge, 2022-05
For those wondering about Clickspring, here is a link: [VIDEO] I advise you not to click on it. It will eat up your time and it takes your complete attention. — KGIII, 2017-08
Specifically this playlist where he builds a desk clock in an estimated 1000 hours: [VIDEO] The last video in the series summaries everything in 12 minutes: [LINK] — xdennis, 2024-12
Related videos
- The Great Wave - Part 1 · David Bull · 9:06
- Around The Corner - How Differential Steering Works (1937) · US Auto Industry · 9:30
- Detergent packs are kinda wishy-washy (Dishwashers Explained) · Technology Connections · 32:34
- Mechanical Computer (All Parts) - Basic Mechanisms In Fire Control Computers · Excelsior10000 · 41:53
- The Antique Toaster that's Better than Yours · Technology Connections · 18:28
- U.S. NAVY BASIC MECHANISMS OF FIRE CONTROL COMPUTERS MECHANICAL COMPUTER INSTRUCTIONAL FILM 27794 · PeriscopeFilm · 19:42
- The Ingenious Design of the Aluminum Beverage Can · engineerguy · 11:39
- Tim Ewald - Clojure: Programming with Hand Tools · ClojureTV · 58:39
- Dick Proenneke in Alone in the Wilderness · swererbob · 9:33
- Origins of Precision · Machine Thinking · 30:32
- Elevator Hacking: From the Pit to the Penthouse · DeviantOllam · 1:55:53
- The Art of Making a Nixie Tube · Dalibor Farný · 37:50
- (1/4) Intro/History: Introducing a 100-year-old mechanical computer · engineerguy · 3:38
- The Hyperloop: BUSTED! · Thunderf00t · 28:39
- DEF CON 22 - Deviant Ollam & Howard Payne - Elevator Hacking - From the Pit to the Penthouse · DEFCONConference · 1:00:16
- [HOPE X] Elevator Hacking: From the Pit to the Penthouse · themarimbaincident · 1:55:53