Why Railroads Don't Need Expansion Joints

Channel:Practical Engineering · Length:15:53 · Published:2023-12-05 · Views:5309443

Watch on YouTube

Summary

Practical Engineering explains how continuous welded rail copes with thermal expansion by restraining it, using the relationship between temperature, stress and strain. The video is part of a series on railways.

Why HN recommends it

Linked in rail and heat-related threads as the clear explanation of why railroads need no expansion joints and how heat problems are handled.

Practical Engineering already explained the correct solution to this problem — HN, 2026

Fundamental physics · Transit, cities & urban planning · Civil engineering & construction

Subtitles (excerpt)

One of the most common attributes folks imagine when they think of trains is the clickety-clack sound they make as they roll down the tracks. The thing is, most trains don’t make that sound anymore. Or really, I should say, most rails don’t make that sound anymore. Trains are still pretty clickety-clacky, but they’re far less so than they used to be. And here’s why: those rhythmic clicks and clacks came from joints in the tracks. Those joints were a solution to a transportation problem: you can only roll out a length of rail so long before it gets difficult to move them around. It’s easier to have short segments of rail that can be bolted together in place. But, they were also a solution to a thermal problem. You might be familiar with the idea of an expansion joint: a gap in a sidewalk or handrail or bridge deck or building meant to give a structure room to expand or contract from changes in temperature. I actually made a video on that topic a few years back. The joints on railroads were bridged by fish plates, but with a gap, so on hot days, the rail would have room to grow. But look for a joint on modern railway, and you might have a hard time. We’re in the middle of a deep dive series on

On Hacker News

Practical Engineering already explained the correct solution to this problem: [VIDEO] But of course, American infrastructure was built on the cheap, and is not maintained correctly. This is why we can't have nice things. — jeffrallen, 2026-07
Not going to be claiming to be an expert, but buckling is a well documented phenomenon and I'd be surprised if there wasn't possible issues due to contraction on the other end of the spectrum when it gets colder, the track was laid this last spring/summer so it's probably not been as cold for long before on the tracks. Also modern high speed rails are built with continious welding without thermal… — whizzter, 2026-01
They also expand the rail with thermite which is probably hotter than the sun is going to make the earth. [VIDEO] — lesuorac, 2024-08
admittedly, it does fall far short of being practical; if your preparation for building a railroad is watching [VIDEO] and your preparation for building a landfill is watching [LINK] , your trains will derail and your garbage will leach into your groundwater but that's not really a difference between the two channels; real engineering manages to pack plenty of misstatements into videos that are e… — kragen, 2024-09

Related videos