Homebrew NMOS Transistor Step by Step - So Easy Even Jeri Can Do It

Channel:Jeri Ellsworth · Length:8:04 · Published:2010-05-13 · Views:183764

Watch on YouTube

Summary

Jeri Ellsworth shows step by step how to make an NMOS transistor at home using a kiln, rust remover, spin-on dopant, eBay wafers and vinyl stickers.

Why HN recommends it

HN points to it as the classic example of home-made semiconductors and a fun way to go down to the transistor level.

If you want to go further down, check out Jeri Ellsworth's old videos where she built a transistor at home — HN, 2020

Semiconductors & chip manufacturing · Embedded systems & DIY electronics

Subtitles (excerpt)

So today I'll be showing how to make an NMOS transistor. This is the type of transistor that turns on when you apply a gate voltage. [Applause] So we start with the ptype wafer with the one 0 crystal orientation. You put it into your kil near your furnace and you pump steam into the furnace and you're going to grow a thick oxide layer that is 5,000 to 6,000 angstroms thick on the top of the wafer. You can tell when you've reached that thickness by a color chart. You can find this color chart online in multiple places, but you're going to be shooting for a green color and it's going to take about six hours to grow that on top of the wafer. The next thing you're going to do is you're going to etch the active layer. So, you're going to use the hydrofluoric acid and you're going to use a vinyl sticker mask that you can cut out. This is like the vinyl signs that you can put on the side of your car. So, this is going to mask the oxide from the acid, and you're going to open up active areas into the wafer. You're going to make structures that look like this. It takes about 15 minutes for the Wink Rust and Stain Remover to etch through 5,000 angstroms of silicon. And you can tell when you've etched all the way through is the water will not stick

On Hacker News

Another book recommendation: "Elements of Computing Systems" by Noam Nisan and Shimon Schocken. It doesn't go all the way down to the physics of semiconductors, but it goes down to logic gates and all the way up to tetris (there's a related course/website called nand to tetris: [LINK] ) If you want to go further down, check out Jeri Ellsworth's old videos where she built a transistor at home: [VI… — didericis, 2020-12
Jeri Ellsworth, for people who don't know, does really interesting hardware stuff. "TSA body imaging at home" ( [LINK] ) "Home made EL wire" ( [LINK] ) "Recording Audio onto floppy discs" ( [LINK] ) "Home made transistor" ( [LINK] ) "Homebrew NMOS transistor" ( [VIDEO] ) — DanBC, 2013-07
Check out Jeri Ellsworth's homebrow NMOS transistor for some real fun. Just get your bare silicon wafer from E-bay and have at it. [VIDEO] — rrmm, 2012-11
I've been following home-made semiconductors since Jeri Ellsworth made her own NMOS FETs in 2010.[1] When Sam managed to make his own ICs, I was happy for him, and for the hobby. Now he seems to be on the verge of democratizing access to semiconductor production in very low volumes. I've got my own project to try out once I can get my hands on it.[2] Who knows, petaflop chips made in the garage c… — mikewarot, 2023-10
Jeri Ellsworth has gone "deeper" into the process and made a few transistors, although at a much larger scale: [VIDEO] [LINK] — userbinator, 2021-11

Related videos