What Is A Black Start Of The Power Grid?

Channel:Practical Engineering · Length:17:06 · Published:2022-12-06 · Views:3159338

Watch on YouTube

Summary

Practical Engineering explains what a black start is: restarting a power grid after total collapse. It shows why most plants need outside power to start and why rebuilding a synchronized grid is delicate and high-stakes.

Why HN recommends it

Go-to reference whenever a major blackout happens, recommended as an excellent explanation of why black starts are hard.

Practical Engineering did a really great video a few years ago on why black starts are hard — HN, 2025

Power grid, heating & buildings

Subtitles (excerpt)

November 1965 saw one of the most widespread power outages in North American history. On the freezing cold evening of the 9th, the grid was operating at maximum capacity as people tried to stay warm when a misconfigured relay tripped a breaker on a key transmission line. The loss of that single line cascaded into a loss of service for over 30 million people in the northeast US plus parts of Ontario in Canada. Restoring electricity to that many people is no simple task. In this case, the startup began with a little 12 megawatt gas generator in Southampton, New York. That’s about the capacity of four wind turbines, but it was enough to get power plants in Long Island back online which were able to power up all of New York City, eventually returning service to all those 30 million people. The grid is a little bit of a house of cards. It’s not necessarily flimsy, but if the whole thing gets knocked down, you have to rebuild it one card at a time and from the ground up. Restoring power after a major blackout is one of the most high stakes operations you can imagine. The consequences of messing it up are enormous, but there’s no way to practice a real-life scenario. It seems as simple as flipping

On Hacker News

Practical Engineering did a really great video a few years ago on why black starts are hard, complete with a tabletop demo about the physics of synchronizing large spinning generators: [VIDEO] — floatrock, 2025-04
The power grid absolutely can fail catastrophically and is a lot more fragile than people think. Texas nearly ran into this during their blackout a few years ago -- their grid got within a few minutes of complete failure that would have required a black start which IIRC has never been done. Grady has a good explanation and the writeup is interesting reading too. [LINK] [VIDEO] — habinero, 2025-10
Practical Engineering on youtube has some good videos on the electrical grid. This one in particular is a good explanation on what they had to go through to get power back on: [VIDEO] — feirlane, 2025-04
The "turning the grid up to 11" attack isn't really possible. I know it seems like it is, but the inverters will only advance frequency so much before they back off, the inverters will only increase voltage so much. Etc. Sounds scary, isn't practical. Turning everything off when the panels are at peak output? That lets frequency sag enough that plants start tripping offline to protect themselves … — msandford, 2024-08
The Practical Engineering Youtube channel has a very interesting video on black starts of an electrical grid [0]. Are there any additional challenges in turning a grid off? [0] [VIDEO] — puzzledobserver, 2024-04

Related videos