Boeing 737NG horizontal stabilizer jackscrew cycle

Channel:Anders Cornelius Olesen · Length:1:40 · Published:2014-06-11 · Views:247102

Watch on YouTube

Summary

A short clip shows the horizontal stabilizer jackscrew of a Boeing 737NG cycling through its motion. It illustrates how pitch trim is physically adjusted.

Why HN recommends it

HN used it during 737 Max crash discussions to show how the stabilizer trim works and why manual trimming takes time.

The issue for the Lion Air pilots was time. — HN, 2018

Aviation & aerospace engineering · Mechanical & precision engineering

Subtitles (excerpt)

[Music] [Applause] [Applause] Heat up [Music] here. Heat. Heat. [Applause] Heat. Heat. Heat. Heat.

On Hacker News

There's no trim tab on a 737 - the whole horizontal stabilizer is moved to trim the aircraft in pitch. Normally this is done electrically, but the stabilizer jackscrew can also be moved using manual trimwheels that move the jackscrew using physical cables. Whether this is possible at high airspeed while the stabilizer is trimmed nose down, and the elevator is being pulled up as hard as you can to… — mhandley, 2019-04
Here's a video of the wheels in motion: [LINK] Disregard the text on the video description as it's blatantly wrong (describing that the trim tabs still move without the wheels moving; wrong on two accounts: the trim doesn't move without the wheels moving and the 737 uses a jackscrew for horizontal stabilizer trim rather than trim tabs [which is why the pilot can't simply override the aerodynamic … — sokoloff, 2019-02
> In theory then, solving the stabilizer problem that caused the crash is as simple as flipping both switches to cutoff, then using the wheel to set the stabilizer back to a sane value. [VIDEO] The issue for the Lion Air pilots was time. At 5,000 ft you don't have time to adjust the trim before you hit the ground. While I think that the stabilizer trim can be adjusted more quickly than the video … — inferiorhuman, 2018-11

Related videos