Build a Do-It-Yourself Air Purifier for About $40

Channel:Michigan Medicine · Length:3:39 · Published:2011-06-27 · Views:2275148

Watch on YouTube

Summary

A University of Michigan Medicine demonstration of building a cheap DIY air purifier from a box fan and a HEPA or high-MERV filter using hardware-store parts. It explains why this helps against dust, smoke and viruses and ties it to local air quality readings.

Why HN recommends it

HN people link it during wildfire smoke and air quality threads as a practical, cheap fix, though a few doubt how rigorously its effectiveness was shown.

Here's a video from the University of Michigan showing just how effective these cheap DIY air filters can be — HN, 2020

Medicine & infectious disease · Home, DIY & practical skills

Subtitles (excerpt)

[ Music ] >> Airborne allergens can cause symptoms, and you can reduce the amount of airborne allergens in your house by using filtration systems. There's a whole array of filtration systems that can be used, from furnace filters that go on the main furnace blower to systems that you can use in a room. They range from $100 to $800 for the high-end systems. And today I'd like to show you the high-end system, and then also show you a homemade system that should work fairly well at home, for a fraction of the cost. This high-end system that's been on loan to us from Ann Arbor Vacuum is an $800 system that will filter virtually every particle out of the air. This particle counter is measuring particles that are .3 microns in size, and it samples every six seconds. With a system like this, you can filter out the particles and therefore -- and thereby reduce the allergy symptoms. So you can see we started off, I believe it was about 400,000 particles. And with this counting system, we can see that it goes down to essentially zero after a few seconds, after a few measurements. And now you can see we're 400, and down to zero. This is an incredibly effective, high-efficiency particulate air filter, or HEPA filter.

On Hacker News

If you are worried about particulate, you can build one of these: [VIDEO] I built one for my room because my previous tenants had cats, which I'm allergic to. Even after steamcleaning our apartment I was chronically congested. Built one of those purifiers and a few days later most of my symptoms are gone. It's been about a month now and the filter is noticeably soiled. — polyfractal, 2012-01
Yeah, same thought. Something like the Coway air filter ( [LINK] ) regularly sells for under $200, and it is going to be much quieter than this option. It also has been tested fairly extensively from what I've seen, it's EnergyStar approved, etc, and it has a built in sensor. It doesn't look too bad either. But I understand the point, especially in times when you can't find a purifier. Also, good… — thomas, 2020-12
If this is because of high PM2.5 concentration (due to wildfires or otherwise), I suggest building a DIY air filter, such as the one in the video here: [VIDEO] When the Air Quality Index shot up to ~150 in my area (you want to keep it below 100, preferably below 50), I went to Home Depot and bought box fans and furnace filters and built my own. You can check the air quality in your area on this s… — shard, 2020-09
The University of Michigan made an instructional video showing how you can easily make an air purifier out of a box fan and a HEPA-rated furnace filter for $25: [VIDEO] It won't be as good as a purpose-built machine, but it will be far better than nothing at all. TheWirecutter found it reduced particulate matter in a room by 87%, if you do it right. They also make clear important caveats about th… — Qub3d, 2020-09
Here's a video from the University of Michigan showing just how effective these cheap DIY air filters can be: [VIDEO] — dublinben, 2020-01

Related videos