How a Character LCD works Part 1

Channel:The 8-Bit Guy · Length:13:59 · Published:2017-04-26 · Views:1309770

Watch on YouTube

Summary

The 8-Bit Guy explains how character LCD screens work and how to control them directly, first part of a series.

Why HN recommends it

HN commenters recommend the series as an approachable demonstration of the simple standardized interface used by character LCDs.

made a great video series on character LCD screens and how to run them — HN, 2019

Electronics & circuit design · Embedded systems & DIY electronics · Demoscene & retrocomputing

Subtitles (excerpt)

Welcome to another episode of the 8-Bit Guy. So, in this episode I want to show you how character LCDs work. Now, these things have been around since at least the 1980s. You can find them in all kinds of electronics like old computers, music keyboards, synthesizers, calculators, early mobile phones, laser printers, and are still widely used today on servers, and for hobby projects with microcontrollers. In fact, they are ridiculously cheap now and you can find them all over ebay for just a few Dollars in just about every shape, size, and color you could want. They come in as small as 8 by 1 characters. Some other common sizes are 8 by 2, 16 by 2, and 20 by 4. These screens should all have either 14 ot 16 pins on them. They can be arranged in different ways, but they should be labelled 1 through 14. I’m going to start by showing you what each of the 14 pins do. The first pin is ground. The next pin is +5 Volts. So these two wires are essentially what gives the screen power. The next pin receives an analog voltage to set the contrast of the screen. Typically this is done by connecting it to the middle pin of a potentiometer. Then the other two leads on the potentiometer go to +5 volts, and ground.

On Hacker News

The 8-Bit Guy on Youtube made a great video series on character LCD screens and how to run them. In the first video he shows how to drive one manually using just switches: [VIDEO] In parts 2 and 3 he shows two ways how to drive them with a C64: [LINK] [LINK] — Nr7, 2019-02
Reminds me of the 8-bit guy's device he created for manually programming character lcd displays. [VIDEO] — loudthing, 2022-06
If you don't need actual HDMI and a regular monitor then there are other solutions which are more like what you describe: Firstly there are simple character LCDs which all have a standardized and simple electrical interface[1] for sending ASCII characters and control codes. Then there are bit-addressable colour displays that let you send drawing commands, eg: [2] [3] [4] [1] [VIDEO] [2] [LINK] [3… — rwmj, 2018-09

Related videos