Boeing 737 Unable to Trim!! Cockpit video (Full flight sim)

Channel:Mentour Pilot · Length:24:08 · Published:2019-04-19 · Views:369773

Watch on YouTube

Summary

Mentour Pilot, a 737 captain, demonstrates in a full flight simulator why a Boeing 737 can become impossible to trim manually at high speed. He explains the jackscrew forces and the roller-coaster manoeuvre.

Why HN recommends it

HN pointed to it during the 737 MAX discussions to show how hard manual trim is when severely out of trim.

I had no idea how bad it can actually get — HN, 2022

Aviation & aerospace engineering

Subtitles (excerpt)

yeah we're still about three degrees away from full closed down trim and I am using everything that I have my god hi everybody better welcome to mentor and general video podcast as always I hope you're doing absolutely fantastic today on the video guys I'm gonna talk about the condition known as miss trim a condition that makes it very very hard to manually trim the stabilized from 7:37 I'll tell you what causes it and what can be done to solve it and at the end I will also answer a question that a lot of you guys asked me about last week's video about the terrain escapement stay tuned this video is brought to you in cooperation with our sponsor know what VPN now if you're like me and you travel all over the world using public Wi-Fi well then you definitely need the services of Noor VPN to keep your data secure and to make sure that you can always access those favorite series of yours even though you might be behind regional firewalls those of you who uses this link here below together with a coupon code pilot will get a 75% off on the three-year plan plus one month off so check it out as well so it will become almost impossible to move it so now we are at about three degrees here we're still about three degrees away from

On Hacker News

> ... it can become impossible for a pilot to physically turn the manual trim wheels to get back into trim I feel like this isn't talked about enough. I had no idea how bad it can actually get: [VIDEO] — jcalvinowens, 2022-02
Well, the "Stabilizer wheel - grasp and hold" item of the procedure doesn't necessarily mean the crew will be able to override it. That's the last ditch option on the checklist, when everything else has failed, even turning the motors off (there could be e.g. a short circuit powering the motor). There is no clutch on the 737, AFAIK, because the forces are such that it wouldn't work. Here is a goo… — janoc, 2019-05
This video by a 737-NG captain shows the kind of forces you get: [VIDEO] It is not MAX but the systems are identical. That's why it is so essential to recognize and stop the runaway trim (for whatever reason) ASAP or you could get into a situation where it would be physically impossible for the crew to do so. — janoc, 2019-05
Depends on the aircraft. Some modern jetliners are using fly-by-wire, while others have hydraulically-boosted controls. Some still rely on cable-and-pulley. Either way, as I understand, it wouldn't matter with the MCAS-related MAX aircraft crashes. The elevator trim is able to move the entire elevator (literally, the entire elevator moves in response to the jackscrew controlled by the trim system… — Zancarius, 2019-05
The pre-MAX 737 has a cut-off switch that switches of the automatic trim system, without also switching of the electric trim (there's another one that switches off the electric trim). The 737 MAX also has two switches, but they both switch off the automatic trim (including MCAS) and the electric trim. So you can't switch off MCAS without also switching off electric trim, leaving only manual trim.… — roelschroeven, 2021-10

Related videos