Samplerates: The Higher the Better, Right?

Channel:FabFilter · Length:29:21 · Published:2020-02-27 · Views:571664

Watch on YouTube

Summary

Dan Worrall explains when higher sample rates help in recording and mixing, and when they do not. He goes into oversampling versus higher sample rates, and aliasing in distortion plugins.

Why HN recommends it

Recommended as a clear explainer on Nyquist, aliasing and sample rate conversion artifacts.

Dan Worrall made a fantastic video which touches on Nyquist. — HN, 2023

Information theory & signal processing · Audio & video engineering · Music theory, synthesis & production

Subtitles (excerpt)

Hi, and welcome back. Today we’re going to talk about samplerates and oversampling: why do we need oversampling options in dynamics plugins like compressors and limiters, or saturators like Saturn? And would it be better to just run a higher project samplerate instead? But lets start with a general chat about resolution. I grew up watching standard definition TV, which here in the UK meant an image size of 720 by 576. Honestly, it seemed fine to me at the time. But compared to modern HD video with 1920 pixels by 1080, the differences are obvious and easy to see. Audio standards have also evolved since my youth: CDs use a samplerate of 44.1KHz and store each sample with 16 bits of resolution. Modern high resolution audio at 96KHz and 24 bits might seem like it should yield as big an improvement over CD audio as HD video provides over standard definition. But its not quite as simple as that. We’re looking here at a 100Hz sine wave in Sound Forge, and what we’re seeing is a graph of how the speaker will move when I play back this test tone. Lets zoom in so we can see the individual samples... each of these is connected with a straight line, but there are enough of the samples in each cycle that when I zoom out

On Hacker News

Dan Worrall made a fantastic video which touches on Nyquist. His youtube channel is a tremendous resource: [VIDEO] — gooseyard, 2023-04
There is a bit more to that when we get to having to modify or convert audio formats, without "right" algorithms it might introduce some artifacts via aliasing [VIDEO] — ilyt, 2023-01
This is largely because MP3 is a crappy, old format. Try high-bitrate Opus on most samples and you're a lot less likely to get above-chance results on an ABX test, pretty much ever, at high bitrates. Ultimately though, lossy compression is always program-dependent ("program" here means the song, not the app). The encoders use psychoacoustic algorithms, and there is no way to prove they will perfo… — marcan_42, 2021-05

Related videos